MaxPro MPCD18VDQF/2 Manual Del Usuario página 6

Connecting and removing the battery
Ensure that the exterior of the battery block or tool is clean and dry before connecting the charger.
being switched on unexpectedly.
/ into the base of the appliance, as shown on the illustration. Push the battery until it
latches in.
W
base of the appliance.
Cordless drill/driver MPCD18VDQF/2 User Manual
Read the manual
Warning
Wear eye protection
Wear ear protection
Wear dust mask
Do not dispose of old appliances in the household garbage
Keep your hands and feet away from all opening
Indoor use only
Ni-Cad batteries can be recycled. Drop them off at a disposal center for
chemical wastes, so that they can be recycled or disposed of in an eco-friendly
manner.
Don't put in the rubbish, Always recycle batteries
OPERATING INSTRUCTION
ion reversing switch is in the central position in order to prevent the appliance from
on both sides before removing the battery, and disengage the battery from the
SYMBOLS
GB
1
6