hawa Concepta 35 pre-mounted Instructions De Montage página 7

Hawa Concepta 35 pre-mounted
1 Table of contents
Contents
2 Product information
3 Safety instructions
4 Abbreviations, symbols
5 Overviews
6 Planning
7 Calculation
8 Pre-assembly
9 Assembly
10 Disassembling
5.1 Overview: Left-hand systems
5.2 Overview: Connector 55 mm (optional)
5.3 Overview: Connector 110 with and without plinth (optional)
5.4 Overview: Position numbers
6.1 Planning: Doors closing against base and top section with Connector 55
6.2 Planning: Doors closing against base and top section with Connector 110
7.1 Calculation: Door size/height ratio
7.2 Calculation: Plan view dimensions
7.3 Calculation: Hardware depth
7.4 Calculation: Drill hole positions
8.1 Pre-assembly: Processing the left side profiles
8.2 Pre-assembly: Processing the right side profiles
8.3 Pre-assembly: Scissor and bar installation, left-hand systems
8.4 Pre-assembly: Aligning the cabinet
8.5 Pre-assembly: Outside face
9.1 Assembly: Door; hinge pre-mounted to upright
9.2 Assembly: Door closing system
9.3 Assembly: Fine adjustment of upright inclination for door thickness between 19 - 22 mm
9.4 Assembly: Positioning the top stop dampener
9.5 Assembly: Positioning the bottom stop dampener
9.6 Assembly: Closing door with scissor bearing
9.7 Assembly: Adjusting the door height
9.8 Assembly: Door gap fine adjustment
9.9 Assembly: Front depth fine adjustment
9.10 Assembly: Fine adjustment pull-in speed
10.1 Disassembling: Door closing system for stationary external face
Page
8
8
14
15
16
17
18
19
20
21
22
23
24
26
27
28
32
33
34
36
39
41
42
43
44
45
46
47
48
7/52