Unpacking the unit
Carefully remove the unit from the carton and remove all packing material
from the unit. Make sure that you have all the following items:
•
Main unit (x1)
•
Remote control (x1)
•
User manual
•
Warranty card
If any item is missing, consult your dealer immediately. We suggest that you retain the original carton and packing
materials in case it is necessary to return your unit for service. This is the only way to protect the unit from
damage in transit. When you dispose of the carton and parking materials, please do so properly. We care about
our environment. Remove any descriptive labels or stickers from the front panel of the unit. Do not remove any
labels or stickers that may be fixed to the
bottom of the main unit.
Precautions for the unit
Security:
•
Before operation, check if the voltage of the unit is in line with the local voltage.
•
Hold the plug to disconnect it from the mains outlet. Do not pull the power cord.
•
When the plug of the unit is connected to the mains outlet, the unit will be still connected
to AC even of the power is turned off.
Disconnect the plug as soon as liquid or objects enter the unit. The unit cannot be used until
being checked by experts.
Do not open the cabinet. Laser rays employed by the unit may damage eyes. Any servicing
should be done by qualifi ed service personnel.
Placement
•
Put the unit where ventilation is good enough to prevent overheating.
•
Never put the unit in direct sunlight or near heat sources.
•
To protect the pickup, do not put the unit where there is a lot of dust. If there is dust on the
pickup, use a cleaning disc to clean it. Refer to the operation instructions of the cleaning disc
you bought
Condensation
•
The unit is suddenly moved from a cold place to a warm place.
•
Use of the unit in a humid place.
•
In these cases, the unit will not work. Unloading the disc and leaving the unit on for about
one hour will evaporate the water, allowing the unit to function normally again.
English
3