Publicidad
Idiomas disponibles
Idiomas disponibles
Functions setup
Manual recording
Notes:
•
To ensure the correct operation of the camera, please set the correct time;
•
Please do not activate the function at the same time Time Lapse
•
The camera can be turned off at any time by holding down the button
ADVANCED SETTINGS
•
Camera modes
Default settings:
ID camera
Photo
Video
If the desired icon does not appear on the LCD screen, press the button repeatedly
it appears.
5
Configuration
Return to first
navigation menu
Enter PIR Auto Working
Mode from Test Mode
1.
Set Photo, or Video, or Photo+Video
: press Menu/OK
Photo Mode
: press Menu/OK
Video Mode
: press Menu/OK
Photo+Video Mode
2.
After configuration above, press and hold button
3 seconds, to return back to Test Mode main interface;
then press Power/Navigation button
recording photo/ video/ photo+video
3.
Press again Power/Navigare
recording
OFF
2MP
VGA (640*480)
In Test Mode, press the Menu/
OK button to enter the settings
menu; now the button
only for navigation; the button
it's only for saving the
made settings
Press and hold the button for
3 seconds
to return to the
main menu after you have
made all the settings
In the main menu, press and
hold the button for 3 seconds
to enter PIR Auto Mode
button; the camera is now on
button; the camera is now on
button; the camera is now on
camera now is
button to stop video
and Delay
Photo+Video
Settings
Delete
it's
for
OFF
until
User manual
Publicidad
