Lets Get Started - La Crosse Technology BBB86088 Manual De Instrucciones

1. Insert 2 AA batteries into
your sensor.
∙The red LED light will flash
when your sensor transmits.
∙The TX button lets you
manually transmit a signal.
2. Insert 2 AA batteries into
your clock.
3. Configure basic settings.
4. After 5 minutes, place
your sensor outside in a
shaded location.
∙ Mount your clock on the wall with the 3 holes on the back, or
use the pullout stand to place your clock on a desk or
counter.
BBB86088

Lets Get Started

Pullout Stand
www.lacrossetechnology.com/support
LED
TX Button
Wall Hang
AA
AA
Page | 2