Manual de Portero IP v 9.0
SURiX IP Access
Versión de software (desde) 3.20
My UDP SIP Port
Is the UDP port number that use the iP Access for the SIP protocol.
Login password of iP Access in IP PBX
Is the password that uses iP Access to log at the IP PBX, if its registration is required
Passwords
(this item can be also programmed in menu
)
My extension # (iP Access)
It is the extension number of iP Access at the IP PBX (if it is connected to an IP PBX)
IP Address or domain of IP PBX
IP address (numeric or verbose form) of IP PBX. If the address is in numeric form, please,
check that addresses of iP Access and IP PBX are in the same addresses range. If IP PBX
is hosted, it is possible to set this his domain name (verbose form, for example:
www.hostedippbx.com) and iP Access will solve the IP address of the IP PBX asking to
DNS server.
NOTE: See below the description of field IP PBX Domain. As a general rule, the data of
both fields are the same.
IP port of IP PBX
Port number at which the IP PBX will listen communication requirements of iP Access
Bottom of range of UDP ports
Top of range of UDP ports
These parameters should be setted if the router of local netowork filter RTP packages by
port (the standard provides that it might happen).
Subnet mask
Range of network addresses
Gateway IP address
If there is an intermediate gateway
DNS IP address
IP address of domain name server, who will provide the numerical value of IP address
conrresponding to (verbose) domain name of IP PBX
IP PBX domain
Hosted IP PBX or broadworks sistems and some IP PBX, even they are in local network
(for example 3CX), needs that domain name or IP address are inserted in call fields. In
those cases, fill this item with name or IP address (same data that was set in item
IP Address or domain of IP PBX )
Time out (in minutes) SIP registration
Is the negotiated registration time with the IP PBX.
IMPORTANT: is strongly recommended not to increase this value
Página 31 de 39