Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Assembly and Disassembly
#1
#2
#1
+
Note:
• When connecting the sections, rotate in opposite directions with both hands and do not screw with too
much force.
• You can choose to use different numbers of sections for different purposes and scenes.
To disassemble, follow the assembly steps as above in the reverse order.
How to Use
1
2
1. Brightness +
M
3
2. Brightness –
3. Color Temperature Button
4
4. Power / Timer Button
5
5. Power Indicator
Standby Mode
Connect the lamp to a power source and it will enter standby mode. The Power Indicator on the Power
Button will light up.
Power On / Off
• Tap the Power Button to turn the lamp on / off.
Color Temperature / Brightness Adjustment
Tap the Color Temperature Button to cycle through 3 color temperature settings. Tap the Brightness + / -
Button to adjust 5 levels of brightness in each color temperature setting.
Auto Shutoff Timer
Press and hold the Power / Timer Button for 2 seconds, the Power Indicator will start to flicker and activate a
60 minutes auto shut-off timer. Repeat this operation or press the Power / Timer Button to turn off the timer.
Adjust the Lamp Head
Note: Please do not turn the lamp head for over 180° to avoid damaging the gooseneck.
01/02
Publicidad
Tabla de contenido
