Replacing The Probe Base; Replacing The Batteries - Icare Tonovet TV01 Manual De Usuario Y Mantenimiento

Replacing the probe base

After several months of use, dust may collect in the probe base, affecting the probe movement.
The probe base should be replaced if the probe no longer moves smoothly.
1.
1. Unscrew the probe base collar and put it in a safe place.
2. Remove the probe base by tilting the tonometer downward and pull the probe base out of the tonometer.
3. Put a new probe base into the tonometer.
4. Screw the collar in, to lock the probe base.

Replacing the batteries

1. Unscrew the battery compartment locking screw with a screwdriver or a small coin.
2. Remove the battery compartment cover.
3. Remove the old batteries.
4. Put new AA batteries into the tonometer according to figures inside the battery compartment. Terminals should
point down on the display side and up on the measurement side.
5. Replace the battery compartment cover and secure it in place by screwing it lightly with the coin or screwdriver.
Be careful not to use excessive force when screwing the cover in place.
2. 3.
Battery compartment cover
4.
9