With Latch - Graco 8486 Manual Del Usuario

6.2.2 With LATCH

1. For ease of installation,
extend LATCH to its
maximum length.
2. Place the car seat firmly
against the back of a
forward-facing vehicle
seat.
3. Thread LATCH
through the belt
path normally used
for the vehicle seat
Ê
belt .
Belt must lay flat
and not be twisted.
4. Hook LATCH
Connectors to vehicle
lower anchors. Pull
firmly on Connectors
to be sure they are
attached
5. Tighten LATCH by
pushing down hard on
car seat and pulling the
adjustment belt
6. NEVER put two LATCH
connectors on one
vehicle LATCH anchor
unless specifically
allowed by the
manufacturer
Ë
.
Ì
.
Í
.
24
Ê
Ë
Ì
Í