Reading The Display - Facom NU-709/95 Guía De Instrucciones

Reading the display

Liquid crystal display with 2,000 measurement gradations
mm)(maximum 600 V)
Automatic symbol display. The left-hand side " 1 " is a flashing display. Automatic
setting selection.
The symbol indicated below lights up when the particular function is activated.
Batteries are low.
HOLD Last value stored in memory.
~
Present measurement is of alternating current.
Present measurement is of direct current.
Continuity test function is active
kΩ mV The test unit symbol is activated.
The figures display the value of the test unit.
A - Fit the removable red plug in the housing on the top side of the equipment.
B - Fit the plug at the end of the black lead as indicated by «B» in the diagram below.
Thus positioned, the distance between the two contacts is the same as that found on
standard electric plugs.
10
and measurement frequency of two measurements per second.
B
(beep function is activated)
(figure height: 10
.