Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Power-On
1)
Pry the switch door open from the bottom using a small
screwdriver.
2)
Ensure the ON/OFF selector is set to ON.
3)
Reset the switch using a paper clip. 0:00 will flash.
If the display is blank:
• Ensure the ON/OFF selector is properly engaged in the ON
position. Push it to the right using a small screwdriver.
• At first power-up after the installation, the screen of the switch
may be blank or dim, or become so when you turn the light on. However, during that time, the
switch is fully functional. Wait 2 minutes for the switch's built-in battery to be sufficiently charged
and the screen will return to its normal contrast.
Setting the Clock
NOTE: The switch displays the time in 24-hour format by default or following a reset.
1)
To change to 12-hour format (or vice versa), proceed as follows:
• Press one of the control buttons to ensure the MAN or AUTO indicator is displayed.
• Press the MIN and HOUR buttons simultaneously and brieftly (0:00 display = 24-hour,
12:00 display = 12-hour ).
2)
Set the time using the HOUR and MIN buttons. If you have selected the 12-hour format, ensure
that PM appears on the screen when an afternoon time is displayed.
3)
Set the day using the DAY button.
4)
Press one of the control buttons or close the switch door to return to normal operation.
Selecting the Operating Mode
The programmable switch has 2 operating modes: manual (MAN) and automatic (AUTO). To switch
mode, press the switch door for 3 seconds.
Manual mode
The programmable switch operates as a regular switch. Briefly press the switch
door to turn the lights On or Off. The mode (MAN) and state (ON or OFF) are
displayed.
Automatic mode
The programmable switch follows the programmed schedule. The mode
(AUTO), state (ON or OFF) and current program number are displayed.
To temporarily override the programmed schedule, briefly press the switch door.
The new state (ON or OFF) will flash to show that this state is temporary. The
override remains in effect until you press the switch door again or until the
beginning of the next program.
2/4
Reset
Control (4)
On/Off selector
Publicidad
Tabla de contenido
