Using The Washing Machine - NEW POL XF6800EL Manual Del Usario

30º 30º 40º
40º 40º 30º
60º 40º
40º
75º
60º
30º
90º
XF6 800 EL
6
Kg
C
(follow these instructions and the washing machine will run the selected wash cycle)
1. Open the door
2. Load the washing in the drum
and close the door.
Warning: Do not overload
the machine. It is not
advisable to wash items
that absorb large quantities
of water such as carpets.
3. Add a low-suds detergent and
s o f t e n e r d e s i g n e d f o r
automatic washing machines
i n t h e r e s p e c t i v e
c o m p a r t m e n t s
detergent drawer (see chapter
"USE OF DETERGENTS").
4. Close the detergent drawer.
Do not open the drawer while
the machine is working as this
may cause water to spill out.
MAX
1000
900
800
The washing machine has a wide
selection of spin speeds that can be
selected before starting the wash
programme. To change the speed,
SM1744
MAIN FUNCTIONS OF THE WASHING MACHINE
L
H
S
Centrifugado
Aclarado
Rápido
800 500
1 2 3
Prelavado
A mano
Lavado
750 550
Aclarado
Centrifugado
Fin
700 600
650
1 Inicio
2 Prelavado
3 Superaclarado

USING THE WASHING MACHINE

WASH CYCLE
5. Press the on button (G); the
led corresponding to the last
program selected will light up.
6. Rotate the programmer knob
(P) to select the required
programme and temperature
according to the type of fabric
to wash (see: "PROGRAMME
TABLES")
7. Select the required spin speed
by rotating the relative knob
(H) (see "VARIABLE SPIN").
8. Select the (C) buttons with
o f t h e
the functions required (see
"OPTIONAL FUNCTIONS").
The pressed buttons will light
up
9. Press button (L) to start the
wash cycle (see "START
BUTTON")
VARIABLE SPIN
simply rotate knob (H) to the value
required. To select the no-spin
500
function, rotate the knob to position
..
600
700
NB. The maximum spin speed (MAX) will vary
according to the machine model and that reported
in the technical characteristics table. The
maximum selectable speed for each programme
is indicated in the programme table (if a higher
spin speed is selected, the machine will only
effect a spin at the value indicated in the table).
MODEL: XF6800EL
P
C Optional function buttons
G On/Off button
stop
90°
75°
60°
30° 40° H Spin selector knob
30°
30° 60°
50°
40°
40°
30° 30°
40°
L Start button
on-off
P Programme and temperature knob
G
S Programme status led
10. At the end of the wash, press
the On/Off button (G) to switch
off the washing machine.
11. Open the door and remove
the washing.
12. With dry hands, unplug the
washing machine from the
mains supply.
13. Close the water feed valve.
Spin load imbalance control:
This washing machine is equipped
with a special electronic control system
for correctly balancing the wash load.
Prior to each spin, the system ensures
that the washing is evenly distributed
in the drum.
If the washing is not evenly distributed,
the final spin speed is reduced, and if
the load is very unbalanced, the spin
is not effected.
GB
5