Optional Functions - NEW POL XF6800EL Manual Del Usario

GB
After selecting the required
programme, press this button to
start the wash cycle Button (L) will
light up to indicate the wash cycle
STOP
The stop function resets the
washing machine. If, for any
PREWASH
Press this button and the machine
will perform a prewash at the
maximum temperature of 40°C.
This function can only be used on
t h e " C O T T O N "
"SYNTHETICS" programmes.
6
USING THE WASHING MACHINE
START BUTTON
has started.
PROGRAMMER KNOB "STOP"
reason, you want to change the
wash programme or add more
washing to the load during the
wash cycle, simply place the
programmer knob in position
"STOP" (the button will start to
flash). Then re-position the knob
on the new programme and press
the "START" button.

OPTIONAL FUNCTIONS

N.B. When this option is used,
the detergent must also be added
to the appropriate prewash
compartment.
EXTRA RINSE
a n d
The washing machine has been
designed to reduce water
MONITORING THE WASH
The figure alongside shows the 5
main functions of a PREWASH,
WASH, RINSE, SPIN, END wash
cycle:
Each of these functions will be
highlighted during the wash by a
led.
In this way, the user is constantly
aware of the progress of the wash.
After the spin phase, the
L
Warning!! only use this
function if strictly necessary
a n d t h e n o n l y
programme to reset has been
running for a few minutes.
Before opening the door after
a reset, wait 2 minutes for the
locking mechanism to release.
consumption to a minimum. In
very soft water areas, or in the
case where detergent residues
are noticed at the end of the wash
cycle, pressing this button will add
one more rinse to the programme.
NB. The use of this function depends
on the type of programme selected.
Consequently, if the wash
programme does not include this
function, the button cannot be
enabled (see PROGRAMME
TABLE").
corresponding led will stay lit for
approximately 2 minutes. This is
the time lapse necessary for the
door release mechanism to work,
after which the END led will light
up.
At this point, press the On/Off
button, open the door and remove
the washing.
i f t h e
SM1744