Medisana MS 2000 Manual De Instrucciones página 14

3.2 Power on the device
• Plug the mains cable completely into the mains connection on the
device.
see postion
• Plug the power plug into a wall outlet.
• Set the on/off switch to the „l" position.
If the electrical connection is interrupted during the mas-
sage, massage heads will return immediately to the
parking position after being reconnected to the power
supply.
If the massage heads are not extended:
Press the On/Off button on the remote control to return
the massage heads to their original position.
3.3 Functions and remote control
After the unit is powered and the On/Off switch is set to position „I", the unit
is in sleep mode.
Only a few basic functions are available in this mode.
The h buttons change the angle of the back section and the leg section of
the device. Button 9 switches the unit on completely.
Overview of all remote control buttons
9 On/Off button: The button and the LC display light up.
Now select one of the massage function buttons to start the massage.
Press button 9 again to end all massage functions. The moving parts of
the massage chair will then return to their original position.
7
0 Pause: Press this button to pause during a previously selected massage
mode. The button flashes and the time control for the massage programs is
also paused. Press the button again to continue the massage.
qw 3D+/3D-: 3D adjustment of the massage heads. There are 4 levels
that influence how strongly you feel the massage.
e Automatic programs: Select one of the 6 available automatic programs.
The device first performs a scan to determine the shoulder height. If you
are not satisfied with the determined position, you can readjust it within 10
seconds using the Up z /Down d buttons. The selected program will then
start.
Neck/Shoulder
Strengthen
Relax
Thai = strong thai massage
Recover
Sleeping = a feeling like a cuddly bed
(Please don't fall asleep!)
h Back and leg section adjustment: the h buttons change the angle of
the back section and leg section of the device. Press the respective button
once to start the movement, press the button again to stop the movement.
The key „G" selects the „Zero-G-Mode". The massage chair moves you into
a horizontal position that feels like weightlessness. Press the button twice
in quick succession to activate the second „Zero-G Mode" - a slightly diffe-
rent position. The third press of the button switches the function off again.
Note: If you press the „G" button while the massage chair is moving into
one of the „Zero-G" modes, the movement is immediately interrupted.
GB
3 Operating
6