Panasonic VL-WD613EX Manual De Instrucciones página 6

monitor station] ® select the number of the sub
monitor to be registered.
R After this, use the sub monitor and complete the
following steps within about 2 minutes.
2 *1
: When "Please register the device." is displayed
on the sub monitor screen, press
(Yes).
R "Registering completed" is displayed.
3
: Press
*1 To re-register cancelled sub monitors:
) ®
(
) ®
(
Cleaning
Wipe the product with a soft, dry cloth.
For excessive dirt, wipe the product with a slightly damp
cloth.
Cleaning the charger:
For safety, disconnect the charger from the power supply
before cleaning.
Cleaning the sub monitor:
To avoid mistakenly operating the sub monitor, remove
its batteries before cleaning.
Specifications
Main body
Power source Rechargeable nickel metal
hydride (Ni-MH) battery
Dimensions
Approx. 173´52´30
(mm) (height ´
(excluding protruding sections)
width ´ depth)
Mass (weight) Approx. 160 g (including the
batteries)
Operating Ambient temperature: approx.
environment 0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Display Approx. 2.2 inches, colour
display
Frequency 1.88 GHz to 1.90 GHz
range
Talking method Hands-free
*1 Standby use: approx. 80 hours
Operating time
6
(
.
: "Register" ®
(Yes)
Charging time
Transmitting
range
*1 When used fully charged in an operating
temperature of 20 °C.
*2 When the operating temperature is 20 °C. The
charging time may increase when the operating
) ®
temperature is lower than this.
*3 When registered to the main monitor.
Charger
Power source
Power
consumption
Dimensions
(mm) (height ´
width ´ depth)
Mass (weight)
Operating
environment
Note:
R Design and specifications are subject to change
without notice.
R The software of this product is based in part on the
work of the Independent JPEG Group.
R Names, company names, product names, software
names, and logos mentioned in this manual are
trademarks or registered trademarks of the
companies concerned.
*2 *3
Approx. 8 hours
Approx. 100 m (line-of-sight
distance from the main monitor)
AC adaptor (PNLV226CE/
PNLV226E)
Input: 220-240 V AC, 0.1 A,
50/60 Hz
Output: 5.5 V DC, 0.5 A
Standby: approx. 0.4 W
(when the sub monitor is not
placed in the charger)
During charging: approx. 1.4 W
Approx. 43´81´76
(excluding protruding sections)
Approx. 70 g (excluding the AC
adaptor)
Ambient temperature: approx.
0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %