Installing the
Handsfree Kit
Guidelines for Installation and
Connection
• Only qualified personnel should install this car kit. If
necessary, contact with vehicle manufacturer for air bag
information specific to the vehicle.
Caution: An air bag inflates with great force. DO NOT
place objects, including communication equipment, in the
area over the air bag or in the air bag deployment area.
If the communication equipment is improperly installed
and the air bag inflates, serious injury could occur.
• Mount components securely on strong surfaces to
prevent shifting that could cause injury or interfere with
safe vehicle operation. Always use the supplied
mounting hardware
• Mounted components and attached wires or cables must
not interfere with seating or leg space.
• Route cables so they are protected from pinching, sharp
edges, and crushing. Keep all in-line connectors easily
accessible.
• This car kit is intended for use in 12 volt negative ground
systems only. The car kit draws less than 3 amps.
Confirm that the vehicle's electrical system can supply
this current.
6