Electromagnetic Fields (Emf); Before First Use; Using The Appliance; Food Processor - Philips HR7770 Manual De Instrucciones

- Always unplug the appliance before you reach into the blender jar
with your fingers or an object (e.g. a spatula).
- Wait until moving parts stop running before you remove the lid of
the bowl or jar.
- Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
- Do not exceed the maximum level indication on the jar and the bowl.
- Consult the table in this user manual for the correct quantities and
processing times.
- Certain ingredients may cause discolourations on the surface of the
parts. This does not have a negative effect on the parts. The
discolourations usually disappear after some time.
- Never fill the blender jar or food processor bowl with ingredients
hotter than 80ºC.
- If you use the blender jar to process a hot liquid, always place the lid
on the jar to avoid the risk of scalding due to hot liquid splashing out
of the jar.
- This appliance is intended for household use only.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
safety features
Built-in safety lock
This feature ensures that you can only switch on the appliance if you
have assembled the blender jar or the bowl correctly on the motor unit
and the lid correctly on the bowl. If the blender jar or bowl and its lid
are assembled correctly (see chapter 'Using the appliance'), the built-in
safety lock will be unlocked.

Before first use

Thoroughly clean the parts that come into contact with food before you
use the appliance for the first time (see chapter 'Cleaning').

using the appliance

general
- The appliance is equipped with a built-in safety lock that prevents it
from functioning if the blender jar or food processor bowl and its
lid are not assembled properly.

Food processor

1 Put the bowl on the motor unit (1) and turn it clockwise to fix it
(2) (Fig. 2).
Note: The bowl is assembled correctly when the handle is directly above the
closed lock symbol.
2 Put the tool holder with the desired accessory in the bowl (blade
unit, kneading accessory, emulsifying disc or the insert holder with
one of the inserts). See the appropriate section below.
3 When you use the blade unit or the kneading accessory, put the
ingredients to be processed in the bowl.
Note: Do not fill the bowl beyond the MAX indication.
4 Put the lid on the bowl (1). Turn the lid clockwise (2) to fix it
('click') (Fig. 3).
Note: Make sure the projection on the lid locks into the slot of the bowl
handle.
5 When you use the insert holder with one of the inserts, add the
ingredients through the feeding tube and push them down with
the pusher.
6 Select the speed setting that corresponds with the colour of the
accessory you choose. See the appropriate section below.
EnglisH
5