Specifications; ChangingTheNozzle(SoldSeparately) - Panasonic EW1211A Instrucciones De Operación

Specifications

See the name plate on the product
Power source
(Automatic voltage conversion)
Charging time Approx. 15 hours
Power consumption Approx. 1 W
Pump frequency 1400 pulses/minute*
JET : 590 kPa (6.0 kgf/cm²)
Water pressure AIR IN (REGULAR): 390 kPa (4.0 kgf/cm²)
AIR IN (SOFT): 200 kPa (2.0 kgf/cm²)
Approx. 15 minutes
Operating time
[at 20 °C (68 °F) when fully charged]
Tank volume Approx. 130 mL (approx. 35 seconds*)
Main unit: 197 (H) x 59 (W) x 75 (D) mm
Dimensions
Charger: 40 (H) x 93 (W) x 98 (D) mm
Main unit: Approx. 305 g
Mass
Charger: Approx. 180 g
* When using AIR IN (REGULAR) mode
This product is intended for household use only.
EW1211A_US.indb 15
(7.75 (H) x 2.32 (W) x 2.95 (D)˝)
(1.57 (H) x 3.66 (W) x 3.85 (D)˝)
(Including nozzle)

Changingthenozzle(Soldseparately)

• If the tip of nozzle gets deformed, please replace with a new
nozzle.
• The nozzle is a consumable. The nozzle should be replaced with
a new one every 6 months or so due to hygiene reasons, even if
its shape is unchanged.
New nozzle (tip) Deformed nozzle (tip)
Part number Replacement Nozzle for EW1211A
EW0950 Nozzle
15
2014/07/11 16:48:21