Surtek TRH5 Manual De Usuario Y Garantía página 10

E N G L I S H •
U s er 's M an u al
THE FORKS CAN NOT BE LOWERED.
Problem: The piston rod or pump is deformed
resulting from partial loading slanting to one
side or over-loading.
Solution: Replace the piston rod or pump.
Problem: The fork was kept in the high position
for long time with piston rod bared to arise in
rusting and jamming of the rod.
Solution: Keeping the fork in the lowest
position if not using, and pay more attention to
lubricate the rod.
Problem: The adjusting nut or screw is not in
correct position.
Solution: Adjust the nut or screw.
LEAKS.
Problem: Sealing parts worn or damaged.
Solution: Replace with the new one.
Problem: Some part cracked or worn into small.
Solution: Replace with the new one.
THE FORKS LOWERED WITHOUT THE RELEASE
VALVE WORKING.
Problem: The impurities in the oil cause the
release valve to be unable to close tight.
Solution: Replace with new oil.
Problem: Some parts of hydraulic system is
cracked or bored.
Solution: Inspect and replace the waste parts.
Problem: Air come into the oil.
Solution: Banish the air.
Problem: Sealing parts worn or damaged.
Solution: Replace with the new one.
Problem: The adjusting nut or screw is not in the
correct position.
Solution: Adjusting the nut or screw.
10