Features; Technical Data; Operation Instructions - Surtek TRH5 Manual De Usuario Y Garantía

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.

TECHNICAL DATA

TRH5
CAPACITY
OVERALL WIDTH
DISTANCE BETWEEN FORKS
FORKS WIDTH
FORKS LENGTH
TOTAL HEIGHT
STRUCTURE HEIGHT
MINUMUM LIFTING HEIGHT
MAXIMUM LIFTING HEIGHT
WHEEL DIAMETER
ROLLERS DIAMETER
TRHB15
CAPACITY
OVERALL WIDTH
DISTANCE BETWEEN FORKS
FORKS WIDTH
FORKS LENGTH
TOTAL HEIGHT
STRUCTURE HEIGHT
MINUMUM LIFTING HEIGHT
MAXIMUM LIFTING HEIGHT
WHEEL DIAMETER
ROLLERS DIAMETER
TRHD15
CAPACITY
OVERALL WIDTH
DISTANCE BETWEEN FORKS
FORKS WIDTH
FORKS LENGTH
TOTAL HEIGHT
STRUCTURE HEIGHT
MINUMUM LIFTING HEIGHT
MAXIMUM LIFTING HEIGHT
WHEEL DIAMETER
ROLLERS DIAMETER
TRHL35
CAPACITY
OVERALL WIDTH
DISTANCE BETWEEN FORKS
FORKS WIDTH
FORKS LENGTH
TOTAL HEIGHT
STRUCTURE HEIGHT
MINUMUM LIFTING HEIGHT
MAXIMUM LIFTING HEIGHT
WHEEL DIAMETER
ROLLERS DIAMETER
8
11 023 lb
27"
14-3/8"
7"
48"
48-7/16"
16-9/16"
3"
7-1/4"
7"
3-1/8"
3 307 lb
21-1/4"
8-11/16"
6-5/16"
45-1/4"
48-7/16"
16-9/16"
2"
6-1/2"
7"
2-1/4"
3 307 lb
27"
14-3/8"
6-5/16"
48"
48-7/16"
14"
3-5/16"
8-1/4"
7-7/8"
2-9/16"
7 716 lb
27"
14-3/8"
6-5/16"
70-7/8"
48-7/16"
14"
3-5/16"
7-7/8"
7-7/8"
3-1/8"
TRHLI2
CAPACITY
OVERALL WIDTH
DISTANCE BETWEEN FORKS
FORKS WIDTH
FORKS LENGTH
TOTAL HEIGHT
STRUCTURE HEIGHT
MINUMUM LIFTING HEIGHT
MAXIMUM LIFTING HEIGHT
WHEEL DIAMETER
ROLLERS DIAMETER

OPERATION INSTRUCTIONS

ATTACHING DRAW-BAR TO PUMP UNIT
If you have purchased a wooden box of pallet
truck, some assembly is required. Certainly, you
need some tools, a hammer, a pliers, a spanner,
etc; and some parts, one axle with hole , two
elastic pins (Note one is in the axle ), these parts
are putted in a plastic bag, which is putted into
the draw-bar.
NOTE: The number of draw-bar and pump
should be the same.
1. DRAW-BAR.
2. PIN.
3. AXLE WITH HOLE.
4. ELASTIC PIN.
5. FORK FRAME.
When attaching the handle, you had better
squat just behind the pallet truck. Then you:
1. Insert the draw-
bar into the pump
piston, then use a
hammer to insert
the axle with hole
into the hydraulic
pump and draw-bar
from the right to left. (See fig. 2 ).
4 409 lb
27"
14-3/8"
6-5/16"
48"
48-7/16"
16-9/16"
3"
7-1/2"
7"
2-7/8"
Fig.1
Fig.2