Debug Method Instruction; Menu Introduction - Mach Power AC-AFDSC-012 Manual De Usuario

2. Important notices
1. Without permission, please do not install any devices on the casework. Make
sure devices earthing is reliable and devices are in the condition of safety and
reliability.
2. When the devices are used in the open air, they should be install on cement
podium of 100mm---200mm height so as to avoid moisture; At the same time,
build a tent over the devices to keep from rain. Directly installation in the open air
is strictly prohibited.

Debug method instruction

1. Connect main board with power ,screen show "Flap barrier(swing barrier or
double swing barrier) ,In counter and out counter number
2. LCD screen have 5 button :Menu ,UP ,Down ,Enter and ESC
3. Main board have RS485 port ,can send turnstile gate command by RS485 port
4. Press menu button to input password ,password is press "UP" "UP" "DOWN""-
DOWN "UP" "DOWN

Menu introduction

1. Direction Config, Left in Right out,Left out Right in
2. Traffic control, L ban R enable, L enable R ban, All ban, All Enable
3. Working mode, L infrared R card, L card R infrared, All infrared, All card
4. Memory Func Config, L ban R enable, L enable R ban, All ban, All Enable
5. Open time, Number is optional
6. Counter reset
7. Machine NO
8. Machine Info
9. Machine type, Flap barrier, Swing barrier, Double swing barrier
10. System Ini, "will clear all info"
11. Left Audio
12. Right Audio
13. Motor Speed, Master motor, Client motor
14. Motor Max turn len
15. Allowed Infrared over
6