Components And Functions - SATA 90795 Manual Del Uso

Water-proof Rechargeable Flood Light
Location of components:
a. Battery level indicator
b. Main light
c. Rotatable handle
d. USB charging interface
e. Main light button
f. USB output interface
(Fig. 1)

Components and functions:

Activation means/
S/N Name LED
operation method
Battery level
a SMD*4 Press button e.
indicator
b Main light COB Press button e.
Rotate it by 225°
c Rotatable handle /
Pull it out for
USB charging
d / charging the
interface
Press the button.
e Main light button /
Press and hold the
USB output
f / USB output (5V 2A)
interface
Notice:
- The battery is not fully charged at delivery, and thus be sure to fully charge it
before its first use. Before charging, make sure the LED light is not working.
- During charging, if the charging indicator flashes, it suggests that the
charging is normal. When the fourth indicator stops flashing and stays on, it
indicates that the current battery level of the light is 100%.
- If the product is not used for a long time, fully charge the battery every 6
months to maintain its performance.
- Always use the dedicated adapter and USB charging cable with the specified
parameters for charging the product; otherwise it may damage the product
and bring risks to personal safety.
- The battery life is determined by the test of a fully-charged new battery at
normal temperature (20° C).
- Open the charging interface before charging. Avoid charging the product in
an environment prone to water entry, such as in the rain, sauna or shower
room.
Warranty:
This item is consumable, and is not covered under SATA lifetime warranty.
4
90795
b
d
a
e
f
c
177
Purpose
When button e is pressed, the system detects the
current battery level. Each indicator represents a
percentage of current battery level
180°
(100%-75%-50%-25%).
It is used to activate the main light.
It is used as a support when the product is to be placed
(Fig. 2) on a plane
Allowed charging voltage and charging current:
5V, 0.5-2A.
battery.
It is used to switch the light to different light levels
The main light operates at the maximum or minimum
button. luminance level.
It is used for emergency charging of any electronic
products
b
d
a
e
f
中文
EN
c
Rotation angle
of handle:
180°
1000LM / 3.5 h 180°
4400mAh
500LM / 7 h Swivelling Handle
Hidden function
When the LED that represents 25% battery level is flashing, it
indicates that the battery needs charging.
When light level 1 is activated via the button, the battery level
indicator goes on.
When light level 2 is activated via the button, the main light is on at
100% luminance.
When light level 3 is activated via the button, the main light is on at
50% luminance.
The top light flashes when the Start switch is in the fourth position
If the button is pressed and held with main light on, the stepless
luminance adjustment will be activated, and when the luminance
is adjusted to the maximum or minimum level, the corresponding
indicator will flash for indication.
Its angle can be adjusted as needed/it can also be used as a lifting
handle when the flood light is used for long-distance illumination
5V 2A (max. charging current)
It can also be used to detect the battery level (anti-touch) and to switch the light to high-light level position/
low-light level position/OFF position
Press and hold button e to adjust the light to a desired luminance level (i.e., stepless adjustment).
5V 2A
Operating conditions:
- The operating temperature is recommended to be within 0-20 ℃ , and the
allowable operating temperature should be within -10℃ to -40℃ , and if the
product is used at a temperature out of these limits, reduced service life and
even product damage may ensue.
- Keep the product away from heat sources. Do not use it in an environment
exposed to high temperature, corrosive gases or corrosive liquids.
- The IP rating of the product is IP54, indicating that a proper amount of water
spray is allowed but immersion in water is prohibited.
Warning:
- Do not directly stare at the light source; otherwise it
may cause eye damage.
- Although short-circuit protection is provided for the
battery, it is prohibited to charge the product near a
heat source or in a corrosive or acidic environment;
otherwise it may result in short circuit, which would
damage the product or bring risks to personal safety.
DE RU KO PT JA
177
180°
(Fig. 2)
IPX4 IPX4
Run Time Charge Time: Water Resistance:
3.5-30 hrs about 3.5hrs
Battery life
Lumen
(fully charged)
1000 3.5hrs
500 7hrs
/
50 30hrs
/
About 3.5hrs
(via a 2A charger)
/ Emergency charging
ES
IPX4
/
/
/
/