Settings Mode; Calibration Mode - oneConcept Montgolfier Manual De Instrucciones

The base station has five keys for easy operation: SET, + , HISTORY, ALARM, MIN/MAX.
The setting procedure can be exited at any time by either pressing the HISTORY key or waiting
for the 30-second time-out to take effect.
While in normal display, Press the SET key to enter the Quick Display Mode as follows:
• Wind speed / Gust speed - use +/- or MIN/MAX to switch display
• 1 hour / 24 hour / week / month / total rainfall quantity
• When displaying the total rainfall quantity, pressing the SET key for 2 seconds will
reset the total value to zero.
• Outdoor Temperature / Wind chill / Dew point
Press the SET key for 2 second while in normal mode to enter the Setting mode. LCD contrast
digits will start flashing. You can skip over any setting by press the SET key. Press + key or
MIN/MAX key to select the units or to scroll the value. To exit the Setting mode at any time,
press the HISTORY key.
• Time Zone Setting (-12 - 12)
Note: 0 for GMT+1 time zone, 1 for GMT+2 time zone, -1 for GMT time zone ...
• 12/24h time format
• Manual time setting (hours/minutes)
• Select date format (DD-MM or MM-DD)
• Calendar setting (year/month/date)
• Change wind speed and gust display units (km/h, m/s, bft, mph, knots)
• Wind direction
• Change rainfall display units (mm or inch)
• Change temperature display unit (°C/°F)
Press the HISTORY key for 8 second while in normal mode to enter the Calibration Mode, and
the wind factor digits will start flashing.
• Wind Speed calibration (default is 1.0, adjustment rang 0.75 to 1.25)
• Rainfall data calibration (default is 1.0, adjustment rang 0.75 to 1.25)
Preferences and Operation
Quick Display Mode

Settings Mode

Calibration Mode

27