Memory Recall; Replacing The Battery - MABIS Healthcare RediScan 18-535-000 Instrucciones

Memory Recall

Recalling Measurements in Memory
1. Press the Power button to turn the
thermometer on.
2. Press the 'Memory' button to recall up
Fig. 1.
to 10 measurements stored in memory,
3. The symbol or symbol will appear with each
a person or object temperature was taken, Fig. 2.
measurement stored in memory to indicate whether
4. The happy face or sad face
5 seconds after viewing the measurement stored in
memory.
NOTE: After 10 measurements have been stored in the
memory, the oldest reading will be automatically deleted.
Clearing Memory
1. Press the Power button to turn the thermometer on.
2. To clear the memory, simply hold the 'Memory' button
lines appear, Fig. 3.
down until the thermometer beeps and two horizontal
Mode Button
Memory Button
Fig. 1
symbol will appear
Fig. 2
Fig. 3
12

Replacing the Battery

When the battery symbol appears on the screen, the batteries will
need to be replaced soon. When the letters "Lo" and the battery symbol
appears on the display, the batteries need to be replaced before taking
another measurement. Rechargeable batteries are okay to use in this
thermometer.
Replacing the Battery
1. Gently slide the battery cover back.
2. Carefully remove the old batteries and properly discard.
3. Insert new batteries according to the proper polarity.
4. Slide the battery cover back on.
NOTE: Please properly dispose of the batteries away from small children
and heat.
13