Safety Instructions; Parts Description; Before The First Use - Kiwi KC 8206 Manual Del Uso

SAFETY INSTRUCTIONS

• By ignoring the safety instructions the manufacturer can not be hold responsible for the
damage.
• Do not use this appliance with a damaged cord or plug or when the appliance has
malfunctions, or has been damaged in any manner. To avoid a hazard make sure that a
damaged cord or plug will be replaced by a competent qualified repair service(*). Do not
repair this appliance yourself.
• Never move the appliance by pulling the cord and make sure the cord can not become
entangled.
• The appliance must be placed on a stable, level surface.
• The user must not leave the device unattended while it is connected to the supply.
• This appliance is only to be used for household purposes and only for the purpose it is
made for.
• To protect children against the dangers of electrical appliances, please make sure that you
never leave the appliance unattended. Therefore you have to select a storage place for the
appliance where children are not able to grab it. Make sure that the cable is not hanging in
a downward position.
• To protect yourself against an electric shock, do not immerse the cord, plug or appliance in
the water or any other liquid.
• Switch off the appliance and disconnect it from the supply before changing the accessories
or approaching the parts that move while in use.
• NOTE: The chopping blades are very sharp, avoid any physical contact when emptying and
cleaning the device, you can get seriously injured.
• Always disconnect the device from the supply if it is left unattended and before assembling,
disassembling or cleaning it.
• Do not allow children to use the device without supervision.

PARTS DESCRIPTION

1. Motor unit
2. Low speed
3. High speed
4. Lid
5. Chopping blade
6. Bowl

BEFORE THE FIRST USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or
plastic from the device.
• Before using your appliance for the first time, wipe off all removable parts with a damp cloth.
Never use abrasive products.
• Place the device on a flat stable surface and ensure a minimum of 10 cm free space around
the device. This device is not suitable for installation in a cabinet or for outside use.
1
6
2
2
3
4
5