HQ-Power VDP250MHS13 Manual Del Usuario página 5

ROTATING GOBO INDEX,
CHANNEL 10
ROTATING GOBO ROTATION
CHANNEL 11
CHANNEL 12 SHUTTER , STROBE
CHANNEL 13
c. DMX-512 Connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-
pin XLR input of the VDP250MHS13. Multiple VDP250MHS13s can be linked through serial linking. The linking cable
should be two core, screened cable with XLR input and output connectors.
Please refer to the diagram at the right.
Caution: At the last fixture, the DMX cable has to be terminated with a terminator.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with the
fixture or one fixture with another.
Occupation of the XLR-connector:
How to turn the controller line from 3-pins into 5-pins (plug and socket)
d. DMX-512 Chain with termination
VDP250MHS13
FOCUS
DIMMER
A DMX terminator is recommended for installations where the DMX cable has to run a long
distance or is in an electrically noisy environment (e.g. discos). The terminator prevents
corruption of the digital control signal by electrical noise. The DMX terminator is simply an
XLR plug with a 120 resistor between pins 2 and 3, which is then plugged into the XLR
output socket of the last device in the chain.
Please see illustrations to the left.
0 60 Gobo indexing (0 - 540°)
61 158 Forwards gobo rotation slow / fast
155 255 Backwards gobo rotation slow / fast
0 255 Far / close distance
0 31 Shutter closed
32 63 Shutter open
64 95 Strobe effect from slow to fast
96 127 Shutter open
128 159 Pulse effect in sequence from slow to fast
160 191 Shutter open
192 223 Random strobe from slow to fast
224 255 Shutter open
0 100 Black / Brightness
5 HQ POWER