Technical Specifications; Connectors; Cables Which Can Be Tested; General Specifications - HT QuickLAN 6055 Manual De Instrucciones

6. TECHNICAL SPECIFICATIONS

6.1. TECHNICAL SPECIFICATIONS

6.1.1. Connectors

LAN input connectors

6.1.2. Cables which can be tested

Cable type
Category
Length
(1) To perform the test "SPLIT PAIR" the cable must be at least 1m long
6.2.

GENERAL SPECIFICATIONS

6.2.1. Mechanical features

Dimensions
Weight

6.2.2. Remote cable identifier mechanical features

Dimensions:
Weight:

6.2.3. Power supply

Battery type
Battery life
Auto Power Off
6.3.

ENVIRONMENT

6.3.1. Environmental conditions

Working temperature
Relative humidity
Storage temperature
Storage humidity
This product conforms to the prescriptions of the European directive on low voltage
2006/95/EEC (LVD) and to EMC directive 2004/108/EEC
6.4.

ACCESSORIES

6.4.1. Standard accessories

The accessories contained inside the packaging are the following:
• Instrument
• Remote units #1 and #2
• Three patch cables RJ-45 to RJ-45 (Patch STP)
• Battery
• Carrying bag
• User's manual

6.4.2. Optional accessories

REM38
REM3
REM4
REM5
REM6
REM7
REM8
RJ45
UTP, STP, FTP, etc.
3, 5, 5E, 6, 7, etc.
(1)
up to 200m
128 (L) x 67 (W) x 39 (H) mm; 5(L) x 2.6(W) x 1.5(H)in
165 g; 5.8ounces
72 (L) x 20 (W) x 23 (H) mm; 2.8(L) x 0.8(W) x 0.9(H)in
25 g; 0.9ounces
1 battery 9V MN1604 6LR61 6AM6
about 300 hours
3 minutes after last pressure on keys
0 ÷ 40 °C; 32 ÷ 104°F
<80%
0 ÷ 40 °C; 32 ÷ 104°F
<80%
remote identifiers #3 - #8 and six patches RJ-45 - RJ-45 STP
remote identifier #3 and one patch RJ-45 - RJ-45 STP
remote identifier #4 and one patch RJ-45 - RJ-45 STP
remote identifier #5 and one patch RJ-45 - RJ-45 STP
remote identifier #6 and one patch RJ-45 - RJ-45 STP
remote identifier #7 and one patch RJ-45 - RJ-45 STP
remote identifier #8 and one patch RJ-45 - RJ-45 STP
EN - 9
QuickLAN 6055