Warning notice:
• Check the SISSEL
Robust massage table before
®
each use.
– All screws and knobs must be securely fastened.
– Ensure that there are no cracks in the wooden
parts.
– The cables must all be intact.
• The maximum load should not exceed 250 kg.
• The feet of the massage table must be adjusted
to the same height.
• Ensure the table has a secure position.
• Do not insert fingers into the moving parts
or joints.
• Young people especially babies and toddlers
should not be left unsupervised on the table. This
product is not suitable for non-responsive people
(risk of falling).
Assembly:
Unlock the case.
1
Open up the table. Remove accessories and lay
2
them out. Straighten each joint out as far as
possible. Press the strut slightly downwards.
Lift the table up and set it up.
3
Pull the table at the head end towards you.
4
Press the table down in the middle.
5
Adjusting the Height:
6
• Loosen screws, adjust legs to desired height
and re-tighten securely.
• The feet of the massage table must be adjusted
to the same height.
7
8
Head and Arm Rests:
Insert the head rest into the slots provided
7
on the head side.
Attach arm rest und adjust to desired height.
8
Loosen the lever and adjust to your desired
9
working angle.
Then refasten the lever.
10
Attach the face pad and fix it to the Velcro strips.
11
Dismantling:
• Lay table on its side, completely fold the legs flat
under the table and fix all accessories and cables
under the table.
• Close all fasteners.
• When closing the table please ensure that cables
are correctly positioned and accessories removed.
Hygiene and Cleaning:
Before use, cover the surface with a towel, a loose
soft cover or a fitted cover. Wipe the table with
neutral soap or a mild disinfectant that contains no
more than 30% alcohol. Apply with a damp cloth
and then dry with a clean one.
Transport and Storage:
Store the massage table securely in the carry case.
Ensure that the massage table does not get in
contact with sharp objects or harmful materials.
Technical Data:
• Weight: ~16 kg
• Material: beech
• PU cover
9
10
11