Important Information; Truggy Battery Installation; Remote Battery Installation - THINK GIZMOS TG541 Manual Del Propietário

1. IMPORTANT INFORMATION

1.1 Truggy Battery Installation

● Turn the Truggy (6) over so that you can gain access to the underside of the vehicle.
● Making sure that the Power switch (5) is in the OFF position, remove the screw (7) and
remove the battery compartment cover.
● Insert 4 AAA batteries (supplied) into the battery compartment observing the correct
pollarity as indicated.
● Re-fit the battery cover and secure with the screw.
(Warning - Remove the batteries if the Truggy is not going to be used for a long time.)

1.2 Remote Battery Installation

3
● The battery compartment is located on the
bottom of the pistol grip controller.
● Push down and slide the battery compartment
cover (9) in the direction indicated to remove it
from the controller.
● Insert 2 AA batteries (supplied)(10) into the
battery compartment observing the correct
polarity as shown.
WARNING
Do not mix old and new batteries.
Keep batteries away from small children.
Do not short-circuit batteries or dispose of in a fire.
Remove the batteries if the truggy is not going to be
used for a long time.