Panel Programming; Technical Features Of The Panel - Fermax LYNX SMILE Serie Manual De Instalador

H) MIC
Microphone connection (microphone located in the lower profi le of the panel).
I) RJ-45
Connector for the physical connection of the RJ-45 cable.
J) Fastboot Button: With no function in the kit.
K) Reset Button: It resets the panel (power supply).
NB: The kit panel can only be confi gured remotely using the integrated web server. Several
functions such as: Audio adjustments, voice synthesisers language, etc. must be confi gured
in this way. This web server can be accessed through the panel IP address that, for the kit
panel, is: 10.100.0.1. For further details see Annex.

PANEL PROGRAMMING

The panel supplied with a line kit is PRE-PROGRAMMED at the factory.
NB: If for any reason it was necessary to re-program it, please check the Annex.

TECHNICAL FEATURES OF THE PANEL

Supply
Consumption
minimum
maximum
IP43
with 1 active relay (Fermax 12VDC door release connected)
IK:07
with 2 active relays (Fermax 12VDC door release connected)
Operating temperature
Camera
 1/3" CMOS colour sensor. Auto-iris for exterior use.
Wide-angle lens.
 90º lens.
 Horizontal resolution: 380 lines.
 Sensitivity: 0.5 lux
 Autobalance.
 Backlight compensation.
Audio power in the indoors-outdoors direction
Audio power in the outdoors-indoors direction
Volume adjustable in both directions
12VDC
190mA.
500 mA
630 mA
950 mA
[-10 , +55 °C]
[14, 131ºF]
1W
0.15W
7
LYNX SMILE KIT