Monitor Programming; Technical Features Of The Monitor - Fermax LYNX SMILE Serie Manual De Instalador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SMILE MONITOR PROGRAMMING
The monitor supplied with a line kit is PRE-PROGRAMMED at the factory.
NB: If for any reason it was necessary to re-program it, please check the Annex.
TECHNICAL FEATURES OF THE SMILE MONITOR
- Operating temperature -5ºC to +40ºC.
- Relative humidity: 5-95%, without condensation.
Consumption (with external 12VDC supply):
Start-Up Process (up to 3 seconds after power is switched on): 430mA.
Idle: 225mA.
• Call: 805mA, (Fermax1 melody at maximum).
• Conversation (video + audio): 630mA.
Monitor Capacity and Parameters, (default values in brackets [ ]):
- Maximum number of monitors per dwelling: 8.
- PIN codes:
• User. 1 code. [Not used]. Used to access user settings or messages. This may be
modifi ed.
• Installer. 1 code. [4444]. Used to access installer confi guration parameters. This may
be modifi ed.
- Conversation channels: Maximum of 1 per apartment.
- Conversation time: 90 seconds.
- Call ring tones 22.
• 20 predefi ned ADPCM, .wav or .mp3 melodies.
• 2 may be downloaded by users from the web server (.wav or .mp3).
- Call ring tone maximum time: 30 seconds.
- Image memory: 128 (QVGA 640x480 resolution ).
- Text messages: 128. 128 character length.
- Audio Notes: Maximum recording time 300 seconds.
- IP Address: Programmed in the kit monitor by default: Block 0 - Unit 1.
Labels
- Tenant name: 16 characters
- Monitor label: 16 characters
- Maximum times:
• Switch-on: 30 seconds. The system will boot up to full functionality within 60 seconds.
• Video connection after call reception: 2 seconds.
• Audio and video delay (from panel to monitor): 0.2 seconds.
• Audio / video desynchronisation: 0.05 seconds.
11
LYNX SMILE KIT

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido