Care and Cleaning (cont.)
• Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately
after applying cleaner. Rinse and dry any overspray that lands on
nearby surfaces.
• Do not allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
• For Artist Edition Toilets: Treat your decorative product just as
you would treat your fine china. DO NOT use bristle brushes or
abrasive-backed sponges. They will scratch decorative surfaces.
Use only warm water to clean. Dry with a cotton cloth or soft
sponge.
For detailed cleaning information and products to consider, visit
www.kohler.com/clean. To order Care & Cleaning information, call
1-800-456-4537.
Troubleshooting
NOTE: This troubleshooting guide is for general aid only. For
warranty service, call 1-800-4KOHLER from within the USA and
Canada, or 001-800-456-4537 from within Mexico.
For service parts information, visit your product page at
www.kohler.com.
Symptoms
Recommended Action
1.
Poor flush.
A. Rotate the float on the fill valve to adjust the
B. Fully open the water supply stop valve
C. Clear obstructions from the trapway, jet, or
D. Clear obstructions in the soil pipe or vent
1095641-2-E
tank water level to match the waterline mark
on the back wall of the inside of the tank.
located inside the tank.
bowl rim holes.
pipe.
12
Kohler Co.