Pfister HanoveR 531 Serie Manual De Instrucciones página 5

15
Pour in liquid soap (not included) into the Shank Orifice (15A). Insert Pump Mechanism
(15B) into Soap Dispenser Body (15C). Install Dispenser Head (15D) by pushing firmly
onto Pump Mechanism (15B).
16 UNIT START UP
16
Turn on hot and cold water supplies, and check for leaks above and below the sink.
17 FAUCET FUNCTION
ENGLISH
17
15D
OPEN
15B
15A
COLD valve: close-counterclockwise, open-clockwise; HOT valve: close-clockwise,
open-counterclockwise. The Spout (17A) can be rotated around the Faucet Body in
any direction.
Note: Flush faucet before turning on valve (see step 21).
18 PULL-OUT OPERATION
15C
18
The Spray Head (18A) can be pulled forward to spray water in any direction.
19 SPRAY OPERATION
19
To activate the spray mode, simply press Toggle Button (19A) located under the spray
head. You can change between spray and stream by pressing the opposite sides of the
Toggle Button (19A/19B) while the faucet is in operation. The water flow will increase
by sliding Spray Selector Switch (19C) from side to side (in spray mode only).
Note: The faucet will always turn on in regular stream mode.
20 SOAP DISPENSER OPERATION
5
FAUCET FUNCTIONS
HOT
17A
18A
19A
COLD
OPEN
19C
19B