inti CEDRO+ Serie Manual De Usuario página 41

Low voltage reconnect
When the LCD shows as displayed at left, press the MENU key for 1s, the icon
1. Lithium battery: low voltage reconnect setting range is 12/24/36/48V: 9.6-62.0V (default: 22.4V)
2. Liquid, Gel and AGM Battery: low voltage reconnect setting range 11.4~12.8/22.8~25.6/34.2~38.4/45.6~51.2V (default: 12/24/36/48V).
The low voltage recovery voltage (LVR) should be higher than the low voltage protection
voltage (LVD) at least 0.6/1.2/1.8/2.4V.
Clear Bluetooth Device Password
When the LCD shows as displayed at left, press the MENU key for 1s, the icon
password set by the mobile app.
Battery type
When the LCD shows as displayed at left, press the MENU key for 1s, the icon flashes, you can set the battery type
Charging Voltage Parameters (Liquid, GEL, AGM):
When choosing Liquid, GEL or AGM for battery type, the parameters of boost, equalization and float charge voltage can be set by mobile phone
APP, RS485. The range of parameters is as follows.
The following voltage parameters are 25C/12V system parameters, 24/48V displayed values are multiplied by a factor of 2/3/4.
Charging stage
Charging Voltage Range
Default Charging voltage
www.intipv.com
Pantalla Battery type
GEL (default)
Liquid
AGM
Lithium
Boost
14,0-14,8V
14,5V
flashes, you can set the controller's low voltage reconnect.
flashes, you can press OK to clear the Bluetooth device
Equalization Float
14,0-15,0V 13,0-14,5V
14,8V 13,7V
MANUAL DE USUARIO CONTROLADOR CEDRO PLUS
41