Safety Instructions; Work Area Environment - Dustcontrol DC 5900 Traducción Del Manual De Instrucciones De Servicio Original

Safety instructions

Read the following safety instructions Before operating the machine. Keep the User Guide. Failure to comply with the safety
instructions voids the warranty and may result in personal injury and damage to the machine. Dustcontrol is not responsible for
damage to the equipment caused by improper installation or improper operation of the equipment.
Warning
This machine is intended for professional use.
Only use accessories and replacement parts included in the Dustcontrol product line.
WARNING
Before use, you must receive training as well as information and instructions on how to handle the dust
extractor and the dust to be extracted.
WARNING
Use the machine for its intended purpose. Follow the instructions for the material to be extracted.
WARNING
When using electrical devices, basic safety instructions must be followed to reduce the risk of fire, electric
shock or personal injury.
WARNING
This machine is only intended for extraction of dry material.
WARNING
If incorrect or non-OEM parts are used (especially filters, hoses and plastic bags), the machine can leak
hazardous dust which may result in personal injury.
WARNING
The feed (hose) must be anti-static or grounded.
CAUTION
The machine must only be used if all filters are intact and fitted properly.

Work area environment

Do not expose the machine to moisture. Do not use it in damp or wet areas or close to flammable liquids or gases.
CAUTION
This machine must only be used and stored in a dry environment.
CAUTION
Do not rinse the machine with water.
Only use accessories approved by the manufacturer for use in Zone 22. The use of other accessories may cause an explosion.
Only suction accessories in antistatic material or metal may be used.
Overload
Never let the machine work fully throttled, as this poses a risk of overheating.
DC 5900, Art.nr. 9458-F 13