Bigben BT12 Instrucciones De Funcionamiento página 8

Previous
Charging the BT12 (3.7V rechargeable battery built-in)
1. Turn off BT12 before charging.
2. Connect BT12 with PC/Laptop/Mac or any 5V USB adaptor(not included) with the USB cable
included.
3. Red LED turns ON during charging, turns OFF after fully charged.
4. Unplug USB cable after fully charged, it costs about 7 hours to fully charge the speaker.
5. Red LED twinkles when low power (<21%), with indication sound.
6. Speaker turns off automatically in 5 minutes if no pairing action.
Paring BT12 with Bluetooth enabled devices (Mobile phones/Tablets etc.)
1. Please keep the speaker and mobile within 1 meter.
2. Hold the Power button for 3 seconds to turn on the speaker, blue/red LED blinks quickly, the
speaker is standby for pairing.
3. Start the Bluetooth function of mobile and search the Bluetooth devices, after searched, select
"BT12" in the Bluetooth device list. As per of the pairing process, you may need to enter a passkey
(0000) depending on Bluetooth version of devices.
4. After successful pairing, select "BT12" in the Bluetooth device list, and press "connect".
5. After successful connecting, LED changes to solid blue.
6. Hold the Power button for 3 seconds to turn off the speaker.
LED mode
Hand free, Play/Pause
- EN 2 -
Next
USB charge AUX in