The (18) Red L.E.D. flashes represent which brand radio the ASWC-1 is connected to. Each flash represents a different radio Manufacturer. For example, if you are installing a JVC radio, the ASWC-1 will
flash Red (5) times, and then stop. Following is a legend that dictates which radio Manufacturer corresponds to which flash.
L.E.D. feedback legend
F lash Count
Radio
1
Eclipse (type 1) †
2
Kenwood ‡
3
Clarion (type 1) †
4
Sony / Dual
5
JVC
6
Pioneer / Jensen
7
Alpine *
8
Visteon
9
Valor
6
PROGRAMMING
F lash Count
Radio
10
Clarion (type 2) †
11
Metra OE
12
Eclipse (type 2) †
13
LG
14
Parrot **
15
XITE
16
Philips
17
TBD
18
JBL
(CONT)
* If the ASWC-1 flashes Red (7) times, and you do not have an Alpine radio connected to it, that
means the ASWC-1 doesn't detect a radio connected it. Verify that the 3.5mm jack is connected
to the correct steering wheel jack/wire in the radio.
** The AX-SWC-PARROT is required (sold separately). Also, the Parrot radio must be updated to
rev. 2.1.4 or higher through www.aparrot.com.
† If you have a Clarion radio and the steering wheel controls do not work, change the radio type
to the other Clarion radio type; same for Eclipse. Refer to the ASWC-1 document online for
changing the radio type.
‡ If you have a Kenwood radio and the L.E.D. feedback comes back as showing as a JVC radio, change
the radio type to a Kenwood. Refer to the ASWC-1 document online for changing the radio type.