jbc JT 6040 Manual Del Usuario página 2

We appreciate the confidence you have placed in JBC in purchasing this station.
It is manufactured to the most stringent quality standards in order to give you the
best possible service. Before turning on your station, we recommend you to read
these instructions carefully.
SPECIFICATIONS
The JT6040 is a hot air generating station intended
for repair work involving electronic circuits with
SMDs of any size.
- JT 6040 230V 50Hz:
- JT 6040 115V 60Hz:
The station's components
- Control Unit with 700 W heater
- JT 1800 heater stand
- Extractor stand
- Set of 5 protectors (Fig. 1, page 34)
- Set of 5 extractors (Fig. 2, page 34)
- 2 tripods for the protectors (Fig. 1, page 34)
- Set of 4 suction cups
- 3 nozzles
In order to make the nozzles removal easier, the
stand has a special bushing.
(Fig. 3, page 34).
- Suction tube with connectors:
- Pedal with cable and connector Ref. 0964551
- Spare filters
- Instruction manual
Ref. 6040200
Ref. 6040100
Control Unit technical specifications
- Temperature selection from 150 to 450°C
- Accuracy of selected temperature: ± 5%
Ref. 0930180
- Air flow regulation: 6-34 l/min
Ref. 0932845
- Station's maximum power: 750W
- Abides the CE standards for electrical security,
electromagnetical compatibility and antistatic
protection.
- Weight of complete unit: 6.2 kg
Ref. 0930110
1
ENGLISH
Ref. 0932330
Ref. 0966689
Ref. 0935400