Cleaning The Cartridge Filter - Ewbank Raycop Instrucciones De Utilización Y Mantenimiento

RAYCOP MANUAL MULTI 7 languages.QXD:RAYCOP MANUALMULTI.QXD
nds
A
B
Cleaning your mattress and cover
Cleaning your mattress and cover
comfortably
comfortably
The age of your mattress determines how often you need to use
your Raycop. The cleaning routine below has been recommend-
ed by the British Allergy Foundation to produce the best results.
G
G
or
If cleaning a double bed only attempt to clean one side at a time.
Position the Raycop flat on the mattress, choose your cleaning
method from the menu and switch on. Keep the Raycop flat on
the cleaning surface and ensure you move the Raycop smoothly
and steadily as you would with a household vacuum(fig A or B).
Use the same method on sheets and duvets, for smaller items
ie, pillows we suggest a backwards and forwards motion as
shown in the diagrams.

Cleaning the cartridge filter

Cleaning the cartridge filter
Ensure the Raycop is unplugged from the mains
To remove
Pull the cartridge out of the Raycop as shown in (fig. 1).
the cartridge
pull upwards,
Remove the filter (fig. 2) and empty the cartridge and remove
to replace
any debris from the filter material with a soft brush.
1
push
You may also wash the filter in tap water.
downwards
You must ensure filter is dry before clipping back into the dustpan.
Reposition the cartridge and filter into the Raycop.
Cartridge
We suggest you replace your cartridge filter and your
& filter
Micro Allergy filter every 12 to 18 months if used as
2
stated in these instructions.
Replacing Micro Allergy filter
Replacing Micro Allergy filter
Ensure the Raycop is unplugged from the mains
Screw
Undo the screw on the rear Micro Allergy filter cover (fig. 3) and
remove. We suggest you place the cover which contains the filter
Micro
inside a plastic bag and recycle accordingly.
Allergy
3
Locate the new cover and micro allergy filter (fig. 4) and replace the
filter cover
screw.
Micro
After replacing the Micro Allergy filter, plug in the Raycop and,
Allergy
using a ball point pen, press the reset button under the filter
filter
replace symbol
4
flash and you will continue to hear a beep.
and efficiently
and efficiently
New mattress - use the Raycop once a month
Used mattress - use the Raycop daily for the first week and
then once a month.
. If this is not done the LED will continue to
45
26/2/08 09:49 Page 46