Scosche LOC2SL Manual Del Usuario página 6

REMOTE SUBNOLUME CONTROL
ADHESIVE STRIP
1. Choose the desired location for the remote volume
control (Figure 1 ).
2. Route the control cable from the selected location to
the LOC2SL main unit.
3. Plug the male 3.5mm control wire into the female
3.5mm input of the LOC2SL module.
4. Peel the backing strip from one side of the adhesive
and attach to the remote volume control case. When
ready to mount, peel away the remaining strip and
press the unit to the mounting surface.
Optional: For additional support use 2 small screws
(screws not included).
6