Scosche LOC2SL Manual Del Usuario página 7

ADJUSTING THE OUTPUT LEVEL
NOTES:
The LOC2SL gain controls are sensitive, a slight adjustment
can change the volume dramatically. The adjustment pots
rotate one complete turn, do not over-turn
or use too much pressure.
Adjust gains with caution.
Too much volume or distortion
can damage your hearing
and the audio equipment.
1. Carefully break away the
screwdriver tool from the side
of the LOC2SL case (Figure 2). �
2. If using the remote volume control
ensure that it is connected to the main
unit with its knob turned all the UP
(Figure 3).
3. Use the included tool at the LOC2SL
module and turn both gain controls
all the way down (counterclockwise
until they stop - Figure 4).
4. Turn stereo on and adjust volume up to �
¾
(or just above loudest listening leveQ
5. Carefully turn up the left and right gain
controls (turn clockwise) on the
LOC2SL until the sound is as loud
as will ever need to be or near
distortion (when sound becomes
garbled, unclear, or breaks up).
6. Turn back each gain
level very slightly from
step #5 and then
immediately turn
down stereo volume.
7. If you hear a "hum" or
excessive "hiss" sound
between songs then the gain
levels may still be adjusted too high.
....--
t?'
,
FIGURE2
FIGURE 3
7
ill