To Set The Time; Manual Programming; Automatic Programming; Automatic Descaling - Cuisinart DCC2650E Instructions

8. Function knob:
a. PROG: to set the desired auto on time.
b. AUTO ON: auto-on feature to program the starting time of the
brew cycle.
c. AUTO OFF: auto-off feature up to 38 minutes after brew cycle
is fi nished.
d. button: to start the brew cycle directly.
e. button: to set the time of the day.
N.B. the fl ow of coff ee from the basket is interrupted when coff ee
pot is removed from the heating plate to let you pour that fi rst cup
midbrew.
B. To set the time
• Turn the function knob on
• Press and hold the HR or MIN buttons until display blinks. Then push
HR or MIN button to scroll through the digits. When the numbers
stop blinking, time is set.
• Note: when the number count passes 12, "PM" will be displayed on
the LCD to set the time from noon to midnight. When there is no
indication, you will set AM times from 0 to noon.
C. No programming
• Fill the reservoir with cold water depending on the desired
number of cups (see height markings inside the reservoir).
• The coff ee pot height markings represent the number of cups
obtained. The diff erence between this scale and the water reservoir
marks results from the amount of water lost in wetting the grounds.
• Insert a #4 paper fi lter in the fi lter holder. Add the desired amount
of ground coff ee in the fi lter. Use one measuring scoop per cup. This
average dose can be adjusted to suit your taste.
• Flip the lid close. Make sure the coff ee pot is in its position on the
heating plate before switching the coff eemaker on.
• Select coff ee strength by pressing the
or button for bold coff ee.
• Turn the function knob to
N.B. For fewer than 5 cups, turn the function knob to
.
• Press . The red indicator light illuminates and the brewing cycle
starts. The end of brewing cycle is signalled by 5 beep sounds.
16
position.
button for regular coff ee
.
then push
• Press to switch the unit off . The red indicator light goes off .
D. Automatic programming
• Turn the function knob to PROG. The numbers blink 5 times then
stop.
• Press and hold the HR or MIN buttons until display blinks. Then push
HR or MIN button to scroll through the digits. When the numbers
stop blinking, time is set.
• Turn the function knob to AUTO OFF. The numbers blink 5 times
then stop.
• Press and hold the HR or MIN buttons until display blinks. Then push
HR or MIN button to scroll through the digits. When the numbers
stop blinking, time is set.
N.B. The maximum duration for coff ee maker to shut off is 38 minutes.
• Turn the function knob to AUTO ON. The current time is now
displayed.
N.B. For fewer than 5 cups, turn the function knob to
.
• Select coff ee strength by pressing the
or button for bold coff ee.
• Press to engage the automatic programming. The
switched off and the AUTO ON button is switched on.
• At the programmed time, the brewing cycle starts and the red
indicator light will come on.
E. Automatic descaling
Use after use, scaling builds up. Scaling interfers with fi ne
mechanics and gives coff ee a hard and bitter taste. That is why
the appliance should be regularly descaled to ensure good
quality coff ee. The descaling frequency depends upon the
hardness of your tap water and how often you use the coff emaker.
• When the coff eemaker needs descaling, the descaling indicator light
next to the button begins to fl ash when the coff ee is turned on.
then push
button for regular coff ee
button is