Back Panel Features; Xlr Outputs - Peavey Q 431F X Manual Del Propietário

Back Panel:
10

BACK PANEL FEATURES:

LINE CORD-120V PRODUCTS ONLY (10)
We have incorporated a 2-wire line (mains) cable for power on the Q431 FX.
Power requirements:
Domestic: 120 V AC / 60 Hz / 20 W.
NOTE: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
Export: 230 V AC / 50/60 Hz / 20 W.
NOTE: FOR UK ONLY
As the colors of the wires in the mains lead of this apparatus may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows: (1) The wire which is colored green and yellow
must be connected to the terminal which is marked by the letter E or by the earth symbol or colored green
or green and yellow. (2) The wire which is colored blue must be connected to the terminal which is marked
with the letter N or the color black. (3) The wire which is colored brown must be connected to the terminal
which is marked with the letter L or color red.
1/4" OUTPUT (11)
A 1/4" Tip-Ring-Sleeve (stereo) jack provides balanced inputs when used with stereo (TRS) 1/4"
plugs and 2-conductor shielded cables. When used with a mono 1/4" phone plug, the output is
unbalanced.

XLR OUTPUTS (12)

This XLR jack provides an electronically balanced output that is electrically the same as the 1/4" TRS
Output (11). Using this balanced output will provide a 6 dB increase from unbalanced operation.
1/4" INPUT (13)
A 1/4" Tip-Ring-Sleeve (stereo) jack provides balanced inputs when used with stereo (TRS) 1/4" plugs and
2-conductor shielded cables. When used with a mono 1/4" phone plug, the input is unbalanced.
XLR INPUTS (14)
This XLR jack provides a balanced input that is electrically the same as the 1/4" TRS Input (13).
5
11 12
13
14