Front Panel Leds; Back Panel Features; Connecting Network Devices - Digitus BLACK RAPID 1000 Manual Del Usario

1.2 Environments
• Storage Temperature: -40oC ~70oC
• Operating Temperature : 0oC ~40oC
• Storage Humidity: 5% ~90% RH Non-condensing
• Operating Humidity: 10% ~90% RH Non-condensing
1.3 Package
• One 10/100/1000Mbps gigabit switch
• One Manual
• One Power Adapter

2.1 Front Panel LEDs

Power LED
This red indicator illuminates when the Switch is receiving power.
Link/Act (1-5)
This blue indicator illuminates steadily when a port is connected to a station
successfully, If this blue indicator is blinking, it indicates that a port is transmitting or
receiving data on the network.

2.2 Back Panel Features

This network ports and the power port are located on the back panel of the switch
1-5
These ports are connection points for PCs and other network devices, such as
additional switches.
Power
The power port is where you will connect the included power adapter.

2.3 Connecting Network Devices

To connect network devices to the Switch, follow these instructions.
1. Make sure all the devices you will connect to the Switch are powered off .
2. Connect a Category 5/5e Ethernet network cable to one of the numbered ports
on the Switch.
Note: Use Category 5e Ethernet network cables for your Gigabit con-
nections
3. Connect the other end to a PC or other network devices.
Chapter 2 Installation