Labeling The Button Designation Card; Test Operation; Administering The Expansion Module - Lucent Technologies 801A Manual De Instrucciones

LABELING THE BUTTON DESIGNATION CARD

The expansion module has a 2-column designation card on which the
user can type or write the telephone numbers, extensions, or features
assigned to each of the buttons on the expansion module. Use the
following directions to remove, label, and replace the designation card.
1 The transparent cover is attached to the frame of the expansion
module by tabs on the top and bottom of the cover. To remove the
cover, press the top tab forward and lift the card cover toward you.
Then, lift the bottom of the transparent cover from the bottom tabs.
2 Remove the card.
3 Print or type the desired labels on the blank designation card.
4 Once you have placed the designation card on the expansion
module, you can replace the transparent cover by inserting the tabs
at the bottom, and press the top down until it clicks.

TEST OPERATION

When you initiate the Test feature on an 8434DX voice terminal with an
attached expansion module, the lights on the 8434DX terminal go on in
four separate groups and the display fills in all the segments. Also, all
the button lights on the expansion module go on.

ADMINISTERING THE EXPANSION MODULE

CAUTION: The 8434DX with an attached expansion module can be
used ONLY with the DEFINITY G3V3.3 system or with later versions
of the DEFINITY switch that allow native support. The 8434DX, with
connected expansion module, MUST BE ADMINISTERED AS
ITSELF.
9