Descargar Imprimir esta página

Important Safety Warnings - Lucent Technologies 801A Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

UL Information
The 801A Expansion Module has been tested and found to comply with
the Underwriters Laboratories (UL) Standard UL 1459, second edition.
This standard requires that you be advised of certain safety instructions
regarding the use of the expansion module.

IMPORTANT SAFETY WARNINGS

The most careful attention has been devoted to quality standards in the
manufacture of this expansion module. Safety is a major factor in the
design of this product. However, safety is YOUR responsibility too.
Please read carefully the helpful tips listed below and on the next page.
These suggestions will enable you to take full advantage of this product.
Then, retain these tips for later use.
When using this expansion module, the following safety precautions
should always be followed to reduce the risk of fire, electric shock, and
injury to persons.
Read and understand all instructions.
Follow all warnings and instructions marked on this expansion
module.
This product can be hazardous if immersed in water. To avoid the
possibility of electric shock, do not use it near water.
To reduce the risk of electric shock, do not disassemble this product.
There are no user serviceable parts inside.
This product should be operated only from the type of dc power
source indicated on the label. If you are not sure of the type of
dc power being provided, contact a qualified service person.
Do not overload wall outlets and extension cords as this can result in
the risk of fire or electric shock.
Disconnect the cords on this product and refer servicing to qualified
service personnel when these conditions exist:
When the module cord or plug is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally by following the
operating instructions.
1

Publicidad

loading