Publicidad
Idiomas disponibles
Idiomas disponibles
O UT DO O R WA LL HO O D
Product Information
Important product information, including the model and
serial number, are listed on the product rating plate. The
rating plate is located inside the left wall of the hood shell.
Refer to the illustration below.
If service is necessary, contact Wolf Factory Certified
Service with the model and serial number. For the name of
the nearest Wolf Factory Certified Service or for questions
regarding the installation, visit the contact and support
section of our website, wolfappliance.com, or call Wolf
Customer Care at 800-222-7820.
RATING PLATE
Rating plate location
IMPORTANT INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY, OBSERVE THE FOLLOWING:
•
Installation work and electrical wiring must be
done by qualified person(s) in accordance with all
applicable codes and standards, including fire-
rated construction.
•
Two installers are recommended due to the size
and weight of the outdoor hood.
•
Install the outdoor hood only with a blower manu-
factured by Wolf.
•
When cutting or drilling into the wall or ceiling,
do not damage electrical wiring and other hidden
utilities.
•
Ducted fans must always be vented to the
outdoors.
CAUTION
To reduce the risk of fire and properly exhaust air,
be certain to duct air outside. Do not vent exhaust
air into spaces within walls or ceilings or into
attics, crawl spaces, or garages.
CAUTION
To reduce the risk of fire and electrical shock,
only install this range hood with remote blower
models rated a maximum of 4.3 A suitable for use
with solid state speed control or internal blowers
manufactured by Wolf, "Blower—1200 CFM".
wolfappliance.com | 3
Publicidad
