Remove The Battery Pack; Operation; Start The Machine; Stop The Machine - GreenWorks Pro 60V ULTRAPOWER ED60L01 Manual Del Operador

EN
1
8.5

REMOVE THE BATTERY PACK

1. Push and hold the battery release button (1).
2. Remove the battery pack from the machine.
9

OPERATION

Before you operate the machine, read and understand the
safety regulations and the operation instructions.
Be careful when you operate the machine.
9.1

START THE MACHINE

1. Push forward the lock-out lever (2) and pull the trigger
(1).
IMPORTANT
WARNING
English
9.2

STOP THE MACHINE

1. Release the trigger to stop the machine.
9.3

ADJUST THE DEPTH OF CUT

1. Remove the battery pack.
2. Loosen the depth adjustment knob to increase or decrease
the depth.
Depth Adjustment Knob
3. Adjust the depth so that the blade barely touches the
ground when the machine is held in a normal operating
posture.
4. Tighten the depth adjustment knob.
5. Standing in a normal working position, check the depth of
cut again and correct if necessary.
6. Replace the battery pack once all adjustments are
complete.
8
2