Declaration Of Conformity - Carson EXPERT CHARGER 3 Instrucciones De Uso

Ocultar thumbs

Contenido

página de 11

/ 11
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

SPECIFICATION

Input: 230V-50Hz OR 12V car battery 12.6V DC

Outputs:

Tamiya plug: 1A-2A-4A (fast charge

adjustable by means of a slide switch)

Transmitter: 150mA

Receiver: 150mA

Charging indicators: 3 LEDs RED fast charge

(LEDs flash during slow charging)

transmitter (150mA)

receiver (150mA)

Power indicator: LED YELLOW

Discharge: LED GREEN

Protection: Each output has a short-circuit and

overcharging protection.

SAFETY MEASURES AND PRECAUTIONS

• The charger must be protected against high humidity

and water.

• Do not fast charge a hot battery pack - let it cool down

naturally before starting the next charging process.

• Do not cover the cooling slots. The unit can get very

warm when in charging.

• Allow the charger to cool down after two fast charging

cycles 4A or 2A.

• Do not recharge the battery pack unless it is

completely discharged.

• Never leave the charger unattended!

• If the battery gets hot (>45"C) remove it from the

charger immediately. Otherwise, it may cause risk and

explosion! When the battery pack has reached a

temperature of 45°C, it must be considered as fully

charged. Do not charge a hot battery.

• Charge only NiCd or NiMH batteries, make sure to

select correct mode before charge.

• Charging with wrong mode may cause risk explosion!

(Do not attempt to charge lead-acid and Li-ion

batteries or primary disposable cells).

• Connect the charger only to appropriate voltage

sources (230V-50H2 mains socket or 12V DC

cigarette lighter socket).

• Never connect the charger to the 230V 50Hz socket

AND the 12V DC socket at the same time, otherwise

it will be damaged.

• Repairs may only be carried out by authorized service

centres.

• CAUTION explosive gases, avoid open fire and

sparks!

• Keep the charger out of reach of children.

• Never plug in the charger if there are any signs of

damage to the housing, cables, connectors or mains

plug. Never try to open the charger.

Service-Hotline:

(8.00 Uhr -17.00 Uhr)

(01805) 73 33 00

12 ct/min

- 0% / +15%

PLEASE NOTE WHEN USING LIPO

BATTERIES

LiPo batteries are particularly vulnerable to excessively

deep discharge or overcharging. Both deep discharge

and overcharge damage the battery permanently and

also pose a significant fire hazard.

• To charge the LiPo battery, remove it from the model

and place it on a non-flammable surface, never on a

car seat or in the boot, for instance.

• CAUTION! For LiPo batteries always put the switch in

position "LiPo". Never switch on "discharge".

• In LiPo batteries with more than one cell, a voltage

imbalance may build up between the individual cells

after several charges. This can lead to a premature

reduction in power. To avoid this, the imbalance can

be equalised by using a balancer. We recommend

our Balancer Chip Item No. 500606043.

NTELLIGENT OFTWARE

YSTEM

4,2V

LiPo/Li-Io

EXPERT

BALANCER

for

2-8 cells

DISPOSAL

Please note and understand the symbols on

this product, packaging or instructions.

Electronic components are valuable materials

and at the end of their useful life should not be

disposed with household waste! Help us to

protect the environment and safeguard our

resources by discarding this equipment at a

dedicated recycling point. The authority

responsible for waste disposal or your retailer will be

able to answer any questions you may have in this

respect.