Flex FX5131 Manual Del Operador página 10

THREE-STAGE BRIGHTNESS ADJUSTMENT
CONTROLLED BY ON/OFF BUTTON (FIG. 6)
Your flood light is equipped with a three-stage
brightness adjustment, providing different light
intensities for your operation.
Press the on/off button briefly to cycle through
the three-stage brightness, each press changes
one stage brightness.
See more details below:
a. To turn the flood light ON, press the ON/OFF
button. The flood light will be turned on at
maximum brightness.
b. To reduce the brightness successively, press
the ON/OFF button again and then a third
time.
c. To turn it OFF, press the ON/OFF button
again (a fourth time).
WARNING
battery pack from the tool when cleaning or
performing any maintenance.
SERVICE
WARNING
unauthorized personnel may result in
misplacing of internal wires and
components which could cause a serious
hazard. We recommend that all tool service be
performed by a FLEX Factory Service Center or
Authorized FLEX Service Station.
GENERAL MAINTENANCE
WARNING
parts. Use of any other parts could create a
hazard or cause product damage. Periodically
inspect the entire product for damaged, missing,
or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and
do not operate this product until all missing or
damaged parts are replaced. Please contact
customer service or an authorized service
center for assistance.
MAINTENANCE
To avoid serious personal
injury, always remove the
Preventive maintenance
performed by
When servicing, use only
identical replacement
Fig. 6
On/Off
Button
WARNING
compressed dry air. Always wear safety
goggles when cleaning tools with
compressed air. Ventilation openings and
switch levers must be kept clean and free of
foreign matter. Do not attempt to clean by
inserting pointed objects through openings.
WARNING
plastic parts. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
Store the tool indoors in a place that is
inaccessible to children. Keep away from
corrosive agents.
-10-
CLEANING
The tool may be cleaned
most effectively with
Certain cleaning agents
and solvents damage
STORAGE